LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1047 (Data Link Communication System) >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the data link connector into position.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts/screws to the data link connector.

    Tighten:  Tighten the bolts/screws to 2 N.m (18 lb in).

    Fig 1: View Of Data Link Connector Retaining Bolts/Screws
    GM386625Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals