Section 872 (Rear Drive Axle)
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Component Locator
- Diagnostic Information and Procedures
- Repair Instructions
- Lubricant Level Inspection - Rear Drive Axle (7.6 and 1st Design 8.6 Inch Axle)
- Lubricant Level Inspection - Rear Drive Axle (2nd Design 8.6 Inch Axle)
- Lubricant Replacement - Rear Drive Axle
- Vent Hose Replacement
- Rear Axle Housing Cover and Gasket Replacement
- Rear Axle Shaft Replacement
- Rear Axle Shaft Seal and/or Bearing Replacement
- Drive Pinion Flange/Yoke and/or Oil Seal Replacement
- Drive Pinion and Ring Gear Replacement
- Drive Pinion Bearings Replacement
- Differential Replacement
- Differential Side Bearings Replacement
- Rear Axle Replacement
- Rear Axle Housing Replacement
- Differential Overhaul
- Bearings Inspection
- Differential Inspection
- Pinion and Ring Gear Inspection
- Rear Axle Housing Inspection
- Shims Inspection
- Pinion Depth Adjustment
- Differential Side Bearing Preload Adjustment
- Backlash Adjustment
- Gear Tooth Contact Pattern Inspection
- Notes
- Drive Pinion and Ring Gear Identification
- Gear Tooth Nomenclature
- Adjustments Affecting Tooth Contact
- Testing Procedure
- Correct Contact Pattern
- Drive Side Heel - Coast Side Toe Contact Pattern
- Drive Side Toe - Coast Side Heel Contact Pattern
- Drive Side Heel - Coast Side Heel Contact Pattern
- Drive Side Toe - Coast Side Toe Contact Pattern
- High Flank Contact Pattern
- Low Flank Contact Pattern
- Description and Operation
- Special Tools and Equipment