Body Control Module Programming/Regular Production Option Configuration

Body Control Module (BCM) must be programmed with proper Regular Production Option (RPO) configurations. If BCM is not properly programmed with correct RPO codes, BCM will not be able to control features properly. Before programming BCM ensure battery is fully charged, ignition switch is in RUN position and Data Link Connector (DLC) is accessible.

To program new BCM, access SPECIAL FUNCTIONS menu on scan tool. Select NEW BCM SETUP and follow instructions. If BCM fails to accept programming or RPO codes, check connections at BCM and ensure scan tool has latest software updates. When BCM is replaced, Passlock™ must also be reprogrammed. See PROGRAMMING THEFT DETERRENT SYSTEM COMPONENTS .