Window Motor (Rear): Installation
- Install rear window regulator bolts half way into rear window regulator motor and rail.
- Position window regulator rail through rear access hole first.
- Position window regulator motor through rear access hole.
- Install window regulator into key slots. Attach regulator to motor and rail. Secure regulator with bolts. Tighten bolts to 97 INCH lbs. (11 N.m).
- Remove tape and position rear window to regulator carrier plate.
- Connect window to regulator carrier plate.
- Connect harness connector to rear window regulator motor.
- Install rear speaker.
- Install water deflector.
- Install trim panel.