On-Vehicle Testing: Notes
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE:
Before making electrical checks, visually inspect all terminals for clean, tight connections. Ensure all charging system related fuses are okay. Check generator mounting bolts and drive belt tension. Ensure battery is in good condition prior to testing charging system. Ensure starting system is okay. See STARTERS - AZTEK article.
NOTE:
Connector Test Adapter Kit (J-35616-A) must be used whenever a test procedure requires checking or probing terminal. Manufacturer recommends using CS Electronic Generator Tester (J-41450-B) to test charging system. Follow instructions provided with tester. No additional testing available.