LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Body Control Modules) >> Programming >> RKE Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

RKE Transmitter Programming

WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: All RKE transmitters recognized by RCDLR must be programmed during programming sequence. If system is placed in program mode it will erase all previously programmed RKE transmitters upon receipt of programming signal from first transmitter.
NOTE: Scan tool must stay connected until all of transmitters are programmed.
  1. Install a scan tool. Turn ignition switch to RUN position. Using scan tool, access Body Control Module (BCM) SPECIAL FUNCTION in PROGRAM KEY FOBS menu.
  2. Press and hold LOCK button and UNLOCK button simultaneously on one transmitter. After 15 seconds, BCM will chime in order to confirm programming of that transmitter.
  3. Repeat previous step in order to program up to 4 transmitters. Remove scan tool. Operate transmitter functions in order to verify correct system operation.
  4. Remove scan tool. Operate transmitter functions in order to verify correct system operation.
scientia non olet · About LEMON Manuals