LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 681 (Body Control System) >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable(s).
  2. Remove the knee bolster. Refer to KNEE BOLSTER REPLACEMENT (NON-LUXURY) or KNEE BOLSTER REPLACEMENT (LUXURY) .
    Fig 1: Knee Bolster
    G01713644Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the brown connector.
  4. Disconnect all other connectors (1).
  5. Remove the BCM from the sliding bracket.
    Fig 2: Removing BCM From Sliding Bracket
    G01713645Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals