Inspection/Maintenance Complete System Set Procedure: Description

This procedure satisfies enable criteria necessary to execute all monitor diagnostics, and complete trips for those particular diagnostics. When all diagnostic tests have been completed, I/M System Status indicators are set to YES. Perform this test when more than one or all I/M System Status indicators are set to NO.

Ensure vehicle meets the following conditions before performing procedure:

• Barometric pressure is greater than 65 kPa.
• Engine coolant temperature is less than 86°F (30°C).
• Intake air temperature is less than 90°F (32°C).
• Difference between intake air temperature and engine coolant temperature is 7°F (5°C) or less.
• Battery voltage is 10-18 volts.
• Fuel level is 1/4-3/4 tank.