LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek GT, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls Self-Diagnostics >> Programming >> Programming Theft Deterrent System Components >> 10-Minute Learn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

10-Minute Learn Procedure

NOTE: Ensure latest Techline® Service Programming System (SPS) software is used.
  1. Connect Tech 2 scan tool to DLC. Turn ignition on, with engine off. Ensure accessories are off.
  2. Using scan tool, select "Request Information" under Service Programming and follow on-screen instructions.
  3. Disconnect scan tool from vehicle and connect it to a Techline® terminal.
  4. Using Techline® terminal, select "Service Programming System" and follow on-screen instructions.
  5. Disconnect scan tool from Techline® terminal and connect scan tool to vehicle.
  6. Using PassKey III® master key, turn ignition on, with engine off.
  7. Using scan tool, select "Program ECU" under Service Programming System.
  8. Leave scan tool connected for the duration of the 10-minute relearn procedure.
    9. NOTE: SECURITY indicator light may stay on during this process.
  9. Observe scan tool. After about 10 minutes, "PROGRAMMING SUCCESSFUL, TURN OFF IGNITION" should be displayed. Vehicle is now ready to relearn key information and/or passwords on the next ignition switch transition from off to on.
  10. Turn ignition off and wait 5 minutes.
  11. Using PassKey III® master key, start engine. The theft deterrent control module has now learned the key transponder information and PCM has now learned the fuel continue password.
scientia non olet · About LEMON Manuals