Inspection/Maintenance Complete System Set Procedure: Description

The purpose of Inspection Maintenance (I/M) complete system set procedure is to satisfy enable criteria necessary to execute all I/M readiness diagnostics, and to complete the trips (drive cycles) for those particular diagnostics. When all diagnostic tests have been completed, I/M system status indicators are set to YES. Perform this test when more than one or all of the I/M system status indicators are set to NO.

Conditions required to perform I/M complete system set procedure are Barometric Pressure (BARO) more than 74 kPa, Engine Coolant Temperature (ECT) less than 86°F (30°C) and Intake Air Temperature (IAT) less than 86°F (30°C). The difference between IAT and ECT must be 14°F (8°C) or less with battery voltage 9-18 volts and fuel level between 1/4 and 3/4.