Circuit Description

The fuel manager/filter assembly consists of fuel heater, water-in-fuel sensor and a filter. Filter contains coalescer, the device that combines small droplets of water into larger ones, and filter/separator. As fuel enters filter, fuel passes first through fuel heater. Heater contains a thermostatic switch. Switch opens or closes to turn heater OFF or ON, depending on temperature of fuel. Fuel then passes through filter. Next, fuel flows through water coalescer. Here droplets of water-in-fuel combine into larger drops and fall into water reservoir in filter. When fuel flows from fuel manager/filter assembly to fuel injection pump, fuel is clean and free of water. When there is water-in-fuel filter, water-in-fuel sensor closes a switch. This completes a circuit to ground for Engine Control Module (ECM). Message center in Instrument Panel Cluster (IPC) indicates water-in-fuel when ECM commands IPC to indicate condition. This is done through data link communications, and command is available on scan tool.