LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control Modules) >> Self-Diagnostic System >> Body Control Module System Diagnostic System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module System Diagnostic System Check

WARNING: This page is about a different car, the 2002 Chevrolet Monte Carlo, 2002 Chevrolet Impala, 2001 Chevrolet Monte Carlo, and 2001 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Use this check as starting point for any body control module system complaint.
  1. Turn ignition switch to OFF position. Connect scan tool to Data Link Connector (DLC). Turn ignition switch to RUN position. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST D: SCAN TOOL DOES NOT POWER UP  under SYSTEM TESTS.
  2. Turn ignition switch to RUN position. Try to establish scan tool communication with Body Control Module (BCM). If communication with BCM is established, go to next step. If communication with BCM is not established, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Select DISPLAY DTC function for BCM. Record all displayed DTCs and status of displayed DTCs. If any DTCs are displayed, go to next step. If no DTCs are displayed, attempt to diagnose suspect system. Go to appropriate diagnostic system check for suspect system. See DIAGNOSTIC SYSTEM CHECK  table.
  4. Using scan tool, retrieve DTCs. If DTCs U1000-U1305 are not present, go to next step. If DTCs U1000-U1305 are present, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  5. Check for DTC B1000, B1013 or B1015. If scan tool does not display DTC B1000, B1013 or B1015, go to next step. If scan tool displays DTC B1000, B1013 or B1015, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . Repair as necessary.
  6. Check for DTC B1334, B1339, B1354 or B1422. If scan tool displays DTC B1334, B1339, B1354 or B1422, perform appropriate test. See DIAGNOSTIC TROUBLE CODE DEFINITIONS . Repair as necessary. If scan tool does not display DTC B1334, B1339, B1354 or B1422, attempt to diagnose suspect system. Go to appropriate diagnostic system check for suspect system. See DIAGNOSTIC SYSTEM CHECK  table.
DIAGNOSTIC SYSTEM CHECK

System Perform Test
Air Bag AIR BAG SYSTEM DIAGNOSTIC SYSTEM CHECK 
Anti-Lock Brake ANTI-LOCK BRAKE SYSTEM DIAGNOSTIC SYSTEM CHECK 
Audible Warnings AUDIBLE WARNINGS SYSTEM DIAGNOSTIC SYSTEM CHECK 
Body Rear End BODY REAR END SYSTEM DIAGNOSTIC SYSTEM CHECK 
Cell Phone CELLULAR COMMUNICATION SYSTEM DIAGNOSTIC SYSTEM CHECK 
Cruise Control CRUISE CONTROL SYSTEM DIAGNOSTIC SYSTEM CHECK 
Defoggers REAR WINDOW DEFOGGER SYSTEM DIAGNOSTIC SYSTEM CHECK 
Engine Cooling ENGINE COOLING SYSTEM DIAGNOSTIC SYSTEM CHECK 
Horns HORNS SYSTEM DIAGNOSTIC SYSTEM CHECK 
Instrument Cluster INSTRUMENT PANEL CLUSTER SYSTEM DIAGNOSTIC SYSTEM CHECK 
Lighting Systems LIGHTING SYSTEM DIAGNOSTIC SYSTEM CHECK 
Power Door Locks DOOR SYSTEM DIAGNOSTIC SYSTEM CHECK 
Power Sun Roofs POWER SUN ROOF SYSTEM DIAGNOSTIC SYSTEM CHECK 
Powertrain Control POWERTRAIN CONTROL SYSTEM DIAGNOSTIC SYSTEM CHECK 
Remote Keyless Entry REMOTE KEYLESS ENTRY SYSTEM DIAGNOSTIC SYSTEM CHECK 
Retained Accessory Power RETAINED ACCESSORY POWER (RAP) SYSTEM DIAGNOSTIC SYSTEM CHECK 
Theft Deterrent ANTI-THEFT SYSTEM DIAGNOSTIC SYSTEM CHECK 
Tire Pressure Monitoring TIRE PRESSURE MONITORING SYSTEM DIAGNOSTIC SYSTEM CHECK