LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Cruise Control System) >> Removal & Installation >> Cruise Control Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control Switch: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Position the switch (2) in the opening on the steering wheel.
  3. Install the fasteners (1) to retain the switch (2) to the steering wheel. Tighten the fasteners (1) to 20 INCH lbs. (2.3 N.m).
  4. Install the access plate.
  5. Install the steering wheel. See STEERING COLUMNS - AURORA article in STEERING.
Fig 1: Removing & Installing Access Plate
G00122542Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Cruise Control Switch
G00122541Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals