Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Install the module starting with the large tang-tilt. Snap the 2 lock arms into the square holes.
- Install the instrument panel (IP) top cover. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P UPPER) .
- Program the transmitter. Refer to Transmitter Programming .