Continuity Inspection

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION .)
Verify that the continuity between neutral switch terminals A and B is as indicated in the table.
- If it can be verified, perform the Circuit Open/Short Inspection .
- If it cannot be verified, replace the neutral switch.
  
  Fig 1: Testing Neutral Switch
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Neutral Switch Continuity Table
  Courtesy of MAZDA MOTORS CORP.