DTC P0341: Camshaft Position Sensor Circuit Performance: Description

During cranking, the ignition control (IC) module monitors the 7X crankshaft position (CKP) sensor signal. Once the engine starts, the IC module determines spark synchronization by the camshaft position (CMP) sensor pulses. The Powertrain Control Module (PCM) constantly monitors the number of pulses on the CMP signal circuit and compares the number of CMP pulses to the number of 24X reference pulses and the number of 3X reference pulses being received. If the PCM receives an incorrect number of pulses on the CMP signal circuit, DTC P0341 will set.