Transmitter Programming Procedure (Method 2 - Scan Tool Required)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install a scan tool.
- Turn the ignition ON, with the engine OFF.
- Use the scan tool in order to access the Body Control Module (BCM) Special Function: Program Key Fobs menu.
- Follow the directions on the scan tool in order to program the transmitters.
- Operate the transmitter functions in order to verify correct system operation.