VCU or VIU Reprogramming
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Important: The new OnStar® component parts must be installed prior to the reconfiguration of the OnStar® system.
After replacement of the vehicle communication unit (VCU) or vehicle interface unit (VIU), the OnStar® system must be reprogrammed.
- Press and hold the Answer/End Button on the OnStar® Button Assembly until the System Status Light goes from solid GREEN to RED and back to GREEN again.
- Call the OnStar® Call Center at 1-888-OnStar1, select prompt 1.
- Give the operator the Electronic Serial Number (ESN) off the new VCU or the Station ID (STID) number off the VIU.
- Move the vehicle outside and let the vehicle run for 10 minutes.
- Press the OnStar® Call Center Call button and ask for a "Reconfiguration".