Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.
- Install the module starting with the large tang-tilt. Snap the 2 lock arms into the square holes.
- Install the instrument panel (IP) top cover. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER .
- Program the transmitter. Refer to Transmitter Programming .