Transmitter Programming Procedure (Method 2 - Scan Tool Required)
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a scan tool.
- Turn the ignition ON, with the engine OFF.
- Use the scan tool in order to access the Body Control Module (BOM) Special Function: Program Key Fobs menu.
- Follow the directions on the scan tool in order to program the transmitters.
- Operate the transmitter functions in order to verify correct system operation.