Installation Procedure

Important:  Verify that the release lever is at the top of the adjuster bracket in the full up position.

1. Install the shoulder belt guide adjuster bracket to the center pillar.
   NOTE: Refer to FASTENER NOTICE .
2. Install the bolt to the shoulder belt guide belt adjuster bracket.

   Tighten 

   Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).

3. Install the center pillar upper trim panel. Refer to TRIM PANEL REPLACEMENT - UPPER CENTER PILLAR .
   Fig 1: Installing Shoulder Belt Guide Belt Adjuster Bracket

   Courtesy of GENERAL MOTORS CORP.