Shift Control Cable: Removal
- Remove the front floor console trim plate. See TRIM PLATE
. Unsnap the range selector lever cable from the transmission control. Remove the retainer and the cable grommet from the base of the transmission control. See Fig 1
.
- Raise and suitably support the vehicle. Unsnap the transmission range selector lever cable from the range selector lever on the transmission.
- Remove the retainer from the range selector lever cable. See Figure
. Remove the range selector lever cable from the cable bracket. Pull the cable through the hole in the front compartment floor pan. Remove the shift cable from the vehicle.
Courtesy of GENERAL MOTORS CORP.