Floor Console: Removal
- Turn the ignition key to the RUN position (4). See Figure . Place the gearshift lever in the Neutral position.
- Remove the shift knob. See FLOOR SHIFT KNOB . Open the console armrest door. Remove the coin holder from inside the console. See Figure .
- Unsnap the switch plate (2) from the floor console. Disconnect the electrical connectors (4) from the switches (1, 3), if equipped. See Figure .
- Remove the console trim plate bolts (2). See Figure . Disconnect the PRNDL light connector. Disconnect the cigarette lighter electrical connector. Remove the console trim plate (1).