Installation Procedure
- Install a stationary window into the opening. Refer to URETHANE ADHESIVE INSTALLATION OF STATIONARY WINDOWS .
- Connect the antenna lead located on the rear quarter window, if equipped.
- Connect the OnStar(tm) Connector located on the rear quarter window, if equipped.
- Install the upper quarter trim. Refer to TRIM PANEL REPLACEMENT -- REAR QUARTER UPPER (AZTEK) or TRIM PANEL REPLACEMENT -- REAR QUARTER UPPER (RENDEZVOUS) .
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Check the radio and the On-Star(tm) system if equipped to verify reception.
- Close the liftgate window.