Password Learn Procedure For Anti-Theft System
WARNING: This page does not describe the selected car, but rather 67 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
- Clear all DTCs. Turn ignition off. Replace component(s) as necessary.
- With transmission in Park (A/T) or Neutral (M/T), turn ignition switch momentarily to START position (engine will not start). Leave ignition switch in RUN position (engine off). If Passlock(TM) sensor was replaced, SECURITY indicator light will flash for 10 minutes. If Passlock(TM) module was replaced, SECURITY indicator light will flash for a few seconds, then stay on for 10 minutes. If PCM was replaced with a new PCM, vehicle may start and procedure may not be needed. If replacement PCM was used even momentarily, SECURITY indicator light will flash for a few seconds, then stay on for 10 minutes. After 10 minutes, when light turns off, turn ignition switch to OFF position for 5 seconds.
- Repeat step 2) twice more. Ignition switch must be turned to OFF position. Auto learn procedure will be completed during next start attempt. Clear all DTCs.