LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Input Speed Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input Speed Sensor: Removal

  1. Remove the case side cover. See CASE SIDE COVER  .
  2. Disconnect the transaxle wiring harness. Remove the input speed sensor clip (441) from the case cover. See Fig 1 .
  3. Remove the input speed sensor (440) from the case cover. Inspect the input speed sensor (440) for the following conditions:
    • Damaged or missing magnet.
    • Damaged housing.
    • Bent or missing electrical terminals.
    • Damaged speed sensor clip (441).
Fig 1: Removing & Installing Input Shaft Speed Sensor
G00073400Courtesy of GENERAL MOTORS CORP.