LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Transaxle Mount & Bracket >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transaxle Mount & Bracket: Installation

  1. Install the transaxle mount to the transaxle mount frame bracket. Install the transaxle mount lower nuts to the transaxle mount frame bracket. Tighten transaxle mount lower nuts to specification. See TORQUE SPECIFICATIONS  .
  2. Position the transaxle mount to the frame. Install the transaxle mount bracket bolts. See Figure . Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to specification. See TORQUE SPECIFICATIONS  .
  3. Remove the utility stand. Install the transaxle mount upper nuts. See Figure . Tighten the transaxle mount upper nuts to specification. See TORQUE SPECIFICATIONS  .
  4. Install the left engine splash shield. Install the left front tire and wheel. Lower the vehicle.
scientia non olet · About LEMON Manuals