LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Aztek FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Body Control Modules) >> Programming >> Rear Integration Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Integration Module

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure scan tool has been updated with latest software version.
  2. Connect scan tool to Data Link Connector (DLC). DLC is located below driver side of instrument panel, near steering column.
  3. Turn ignition switch to RUN position.
  4. Under chassis main menu, select REAR INTEGRATION MODULE (RIM).
  5. Under RIM main menu, select RECALIBRATION.
  6. Follow scan tool instructions to recalibrate automatic level control.
  7. Turn ignition switch to OFF for 10 seconds. Turn ignition switch to RUN. Use scan tool to clear all history DTCs. Reset owner desired memory settings (seats, mirrors, radio, A/C).
scientia non olet · About LEMON Manuals