Sun Roof Actuator Programming
WARNING: This page does not describe the selected car, but rather 67 other vehicles, including the 2000 Saturn SW2, 2000 Saturn SL2, 2000 Saturn SL1, 2000 Saturn SL, and 2000 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.
- Procedure must be performed when vehicle battery is disconnected. Turn ignition on.
- Rotate knob on sun roof control switch to CLOSED position. Sun roof control switch is located on the overhead console near the windshield. After sun roof is fully closed, press and hold knob on sun roof control switch inward for 3 seconds.
- Rotate knob on sun roof control switch to the VENT position. After sun roof moves to the vent position, press and hold knob on sun roof control switch inward for 3 seconds.
- Rotate knob on sun roof control switch to the OPEN position. After sun roof fully opens, press and hold knob on sun roof control switch inward for 3 seconds.
- Rotate knob on sun roof control switch to CLOSED position. After sun roof is fully closed, press and hold knob on sun roof control switch inward for 3 seconds.
- Sun roof actuator is now programmed. If after programming the sun roof actuator, the sun roof opens after being closed, it may be necessary to reprogram actuator up to 3 more times.