LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2003 >> Sunfire Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Body Control Modules) >> Self-Diagnostic System >> Cruise Control System Diagnostic System Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cruise Control System Diagnostic System Check

WARNING: This page is about a different car, the 2002 Pontiac Sunfire, 2002 Chevrolet Cavalier, 2001 Pontiac Sunfire, and 2001 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect scan tool to Data Link Connector (DLC). DLC is located on lower left side of instrument panel, near steering column. If scan tool powers up, go to next step. If scan tool does not power up, go to TEST A: SCAN TOOL DOES NOT POWER UP  under SYSTEM TESTS.
  2. Turn ignition switch to RUN position. Attempt to establish communication with Powertrain Control Module (PCM). If scan tool communicates with PCM, go to next step. If scan tool does not communicate with PCM, go to TEST B: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYSTEM TESTS.
  3. Select DISPLAY DTCs function on scan tool for PCM. If any powertrain DTCs (DTCs beginning with "P") are retrieved, perform appropriate test in accordance with DTC retrieved. See DIAGNOSTIC TROUBLE CODE DEFINITIONS  . If no powertrain DTCs are retrieved, diagnose and repair cruise control concern by symptom.
scientia non olet · About LEMON Manuals