Cleaning Procedure
- Disconnect the negative battery cable.
- Remove the fuel tank from the vehicle.
- Remove the fuel sender assembly from the fuel tank.
- Fill the fuel tank with hot water.
- Shake the fuel tank vigorously for 5 minutes.
- Drain the fuel tank.
- Ensure all of the water is removed from the fuel tank. If the inside of the fuel tank contains any traces of rust after cleaning, replace the fuel tank.
- Install the fuel sender assembly to the fuel tank.
- Install the fuel tank to the vehicle.
- Refill the fuel tank.
- Connect the negative battery cable.
- Check for fuel leaks and repair as necessary.
NOTE:
When flushing the fuel tank, handle the fuel and water mixture as a hazardous material. Handle the fuel and water mixture in accordance with all applicable local, state, and federal laws and regulations.