Removal Procedure
- Remove and reposition the underhood electrical center. Refer to Underhood Electrical Center or Junction Block Replacement in Wiring Systems.
- Remove the front end sheet metal diagonal brace. Refer to Brace Replacement - Front Fender Upper Diagonal - Right in Body Front End.
- Remove the battery ground (negative) cable from the battery. Refer to Battery Negative Cable Disconnect/Connect Procedure (LA1) or Battery Negative Cable Disconnect/Connect Procedure (LY7) .
- Remove the battery positive cable from the battery.
- Remove the battery hold down retainer.
- Remove the battery.
- Remove the battery insulator from the battery.
IMPORTANT:
Do not tip the battery more than 40 degrees.