LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (HVAC Systems - Manual) >> Repair Instructions >> HVAC Control Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Impala) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Monte Carlo) in Instrument Panel, Gages, and Console.
  2. Remove the retaining screws from the HVAC control module.
    3. Fig 1: Removing HVAC Control Module Retaining Screws
    GM522103Courtesy of GENERAL MOTORS CORP.
  3. Pull the HVAC control module out from the instrument panel.
  4. Disconnect the electrical connectors from the HVAC control module.
    5. Fig 2: Disconnecting HVAC Control Module Electrical Connectors
    GM410369Courtesy of GENERAL MOTORS CORP.
  5. Remove the HVAC control module from the instrument panel.
scientia non olet · About LEMON Manuals