Section 93 (Seat System)
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Schematic and Routing Diagrams
- Component Locator
- Diagnostic Information and Procedures
- Diagnostic Starting Point - Seats
- Diagnostic System Check - Power Seat Systems
- Scan Tool Data List
- Scan Tool Data Definitions
- DTC B0846 or B0851: Battery 1 Or Battery 2 Voltage Range
- DTC B0856: Position Sensor Voltage
- DTC B2172, B2177, B2182, B2187, B2192, or B2197: Seat Adjuster Switch Input Active Too Long
- DTC B2600: Adjuster Motor Control Circuit Voltage
- DTC B2605, B2606, B2607: Position Sensor Signal Circuit Voltage
- Repair Instructions
- Seat Replacement (Power)
- Seat Replacement (Manual)
- Seat Cushion Frame Replacement
- Seat Cushion Trim Cover and Pad Replacement
- Seat Back Cover and Pad Replacement - Front (RPO AR9 Base Seat)
- Seat Back Recliner Mechanism Replacement - Front
- Seat Back Recliner Handle Replacement - Front
- Seat Back Release Cable Replacement - Front
- Seat Back Trim Replacement - Front
- Lumbar Pump Replacement
- Lumbar Bladder Replacement
- Seat Side Bolster Bladder Replacement - Front
- Seat Adjuster Replacement - Front
- Seat Adjuster Motor Replacement - Front
- Seat Switch Replacement - Power
- Memory Seat Control Module Replacement
- Trim Panel Replacement - Front Seat
- Description and Operation
- Special Tools and Equipment