Installation Procedure
IMPORTANT:
Position the remote control door lock receiver to the defroster air duct.
- Install the remote control door lock receiver (2).
- Engage the remote control door lock receiver retainers.
- Connect the remote control door lock receiver electrical connector (1).
- Install the upper trim pad. Refer to Trim Pad Replacement - Instrument Panel (I/P) Upper (Aztek) or Trim Pad Replacement - Instrument Panel (I/P) Upper (Rendezvous) in Instrument Panel, Gages and Console.
- If a new remote control door lock receiver is being installed, program the transmitter. Refer to Transmitter Programming .