Installation Procedure
- Install the cable through the dash panel from the engine side. Install the accelerator pedal cable to the slot in the accelerator pedal lever (1).
Courtesy of GENERAL MOTORS CORP.
- Connect the accelerator pedal cable (2) to the accelerator pedal lever (1), inside the vehicle.
- Install the left instrument panel lower trim. Refer to Closeout/Insulator Panel Replacement - Left
in Instrument Panel Gages, and Console.
- Install the retainer clip at the theft deterrent horn bracket.
Courtesy of GENERAL MOTORS CORP.
- Install the accelerator pedal cable (3).
- Install the cruise control cable (2).
- Install the throttle relaxer cover (1).