LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 5.7L -- (Introduction) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Chassis >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the fuel and EVAP lines to the vehicle.
    2. Fig 1: View Of Fuel & EVAP Lines
    GM1372184Courtesy of GENERAL MOTORS CORP.
  2. Install the fuel line bracket pop rivets.
    3. Fig 2: View Of Stone Guard Nuts & Bolts
    GM1372176Courtesy of GENERAL MOTORS CORP.
  3. Install the bolts (2) and the nuts (1) to the stone guard.
  4. Install the fuel and EVAP lines at the fuel tank. Refer to Fuel Tank Replacement .
  5. Install the fuel and EVAP lines at the engine compartment. Refer to Fuel Hose/Pipes Replacement - Engine Compartment .
  6. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 2 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals