LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 5.7L -- (Introduction) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
  1. Depress the power steering reservoir retaining clip and lift it up on the reservoir and set aside.
  2. Unbolt and remove the power steering reservoir mounting bracket. Refer to Remote PS Fluid Reservoir Bracket Replacement in Power Steering.
  3. Fig 1: View Of TP Sensor & IAC Valve
    GM216230Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the TP sensor electrical connector.
  5. Remove the TP sensor attaching screws (5).
  6. Remove the TP sensor (6).
  7. Remove the TP sensor O-ring seal (7).