LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Grand Prix GT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
  2. Disconnect the MAF/IAT sensor electrical connector (2).
  3. Disconnect the PCV tube.
  4. Loosen the air cleaner intake duct clamps at the throttle body and the air cleaner housing cover.
  5. Remove the air cleaner intake duct from the air cleaner cover.
  6. Remove the air cleaner intake duct from the throttle body.
    7. Fig 1: View Of Air Cleaner Intake Duct
    GM1208107Courtesy of GENERAL MOTORS CORP.
  7. Remove the MAF/IAT sensor from the air cleaner intake duct.
  8. If replacing the air cleaner intake duct, remove the clamps.
scientia non olet · About LEMON Manuals