LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 3.8L >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. If removed, install the clamps to the air cleaner intake duct.
  2. Fig 1: View Of Air Cleaner Intake Duct
    GM1208107Courtesy of GENERAL MOTORS CORP.
  3. Install the MAF/IAT sensor to the air cleaner intake duct.
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the air cleaner intake duct to the throttle body and the air cleaner cover.

    Tighten:  Tighten the duct clamps to 3 N.m (27 lb in).

  6. Connect the PCV tube.
  7. Connect the MAF/IAT sensor electrical connector (2).
  8. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.