Installation Procedure

Install the battery (2) with the positive (+) side facing down.
Use one 3-volt CR2032 battery or the equivalent.
Ensure the transmitter case seal is in the proper position.
Align the 2 halves of the transmitter case (6,4).
Snap the 2 halves of the transmitter case together.

Fig 1: View of Transmitter Battery & Case
Courtesy of GENERAL MOTORS CORP.

IMPORTANT: Normal battery life is approximately 2 years. Replace the batteries when the range of the transmitter begins to decrease significantly to less than approximately 7 m (23 ft).

Test the operation of the transmitter. Refer to Description and Operation .