Removal Procedure

When removing the center child tether anchor, or the vehicle is equipped with OnStar and/or digital radio, perform the following steps:
1. Remove the rear window trim panel from the rear shelf. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
2. Remove the tether anchor bolt (3).
  Digital radio bracket shown, global position system (GPS) bracket similar.
  
  Fig 1: Exploded View Of Child Restraint Tether Anchor
  Courtesy of GENERAL MOTORS CORP.
3. Remove the GPS bracket, and or the digital radio bracket (2) from the tether anchor (1).
4. Remove the tether anchor (1) from the rear shelf (5).
When removing the outer child tether anchor, or the vehicle is not equipped with OnStar and/or digital radio, perform the following steps:
1. Remove the tether anchor bezel from the rear window shelf trim.
2. Remove the bolt from the tether anchor.
3. Remove the tether anchor from the rear shelf.
  
  Fig 2: Identifying Child Restraint Tether Anchor Bezel
  Courtesy of GENERAL MOTORS CORP.