LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication Systems >> Repair Instructions >> Communication Interface Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: The vehicle communication interface module (VCIM) has a specific set of unique numbers that tie the module to each vehicle. These numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar® to identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts with those of another vehicle.
  1. Remove the right insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
  2. Remove the instrument panel compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
    3. Fig 1: Locating VCIM Bracket To Instrument Panel Metal Brace Screws
    GM725615Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws securing the VCIM bracket to the instrument panel metal brace.
    4. Fig 2: View Of Communication Interface Module Electrical Connectors
    GM725713Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
  5. Disconnect the cell antenna coaxial cable from the VCIM.
    6. IMPORTANT: The old VCIM must be returned for core credit.
  6. Remove the VCIM from the bracket and the vehicle.
scientia non olet · About LEMON Manuals