LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Socket >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Aligning 12-Volt Power Supply Retainer With Power Supply Hole Slot
    GM706169Courtesy of GENERAL MOTORS CORP.
  1. Position the 12-volt power supply retainer with the key to the slot into the power supply hole.
    2. Fig 2: Pressing Power Supply Retainer Into Place
    GM706170Courtesy of GENERAL MOTORS CORP.
  2. Install the power supply retainer pressing into place until fully seated.
    3. Fig 3: Locating 12-Volt Power Supply Receptacle Electrical Connector
    GM706165Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the I/P power supply receptacle.
    4. Fig 4: Aligning Power Supply Receptacle To Retainer
    GM706174Courtesy of GENERAL MOTORS CORP.
  4. Position the power supply receptacle to the retainer.
    5. Fig 5: Installing Power Supply Receptacle
    GM706173Courtesy of GENERAL MOTORS CORP.
  5. Install the power supply receptacle into the I/P, pressing into place until fully seated.
  6. Install the power supply fuse.
  7. Inspect the power supply for proper operation.
scientia non olet · About LEMON Manuals