Removal Procedure
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
- Remove the fuel filler cap.
- Drain the fuel tank. Refer to Fuel Tank Draining Procedure .
- Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Remove the fuel filler pipe attaching nut to wheelhouse stud (1).
- Remove the fuel filler pipe attaching screw (3) to the wheelhouse panel.
- Loosen the fuel filler pipe clamp.
- Remove the fuel filler pipe (2) from the fuel tank (1).
- Remove the fuel filler pipe from the grommet on the fuel filler pocket (4).
NOTE:
Refer to Cover and Plug Openings Notice in Cautions and Notices.
IMPORTANT:
Always maintain cleanliness when servicing fuel system components.