LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Fuel Tank Pressure Sensor
    GM682671Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel pump electrical connector (2).
  3. Remove the fuel level sensor electrical connector retaining clip (4).
  4. Disconnect the fuel level sensor electrical connector from under the fuel sender cover (5).
  5. Remove the fuel level sensor retaining clip.
  6. Squeeze the locking tangs and remove the fuel level sensor (3) from the modular fuel sender.
scientia non olet · About LEMON Manuals