LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Quarter Window Replacement (Buick) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    2. Fig 1: View Of Quarter Window (Buick)
    GM696087Courtesy of GENERAL MOTORS CORP.
  2. Connect the antenna lead located on the rear quarter window, if equipped.
  3. Connect the OnStar™ Connector located on the rear quarter window, if equipped.
  4. Install the upper quarter trim. Refer to Trim Panel Replacement - Rear Quarter Upper (Aztek) or Trim Panel Replacement - Rear Quarter Upper (Rendezvous) in Interior Trim.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  6. Check the radio and the On-Star™ system if equipped to verify reception.
  7. Close the liftgate window.
scientia non olet · About LEMON Manuals