LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Lubricate the O-ring with clean engine oil. Replace the O-ring if the O-ring is damaged.
    2. Fig 1: View Of CMP Sensor
    GM16120Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the camshaft position sensor.

    Tighten:  Tighten the retaining bolt to 8 N.m (71 lb in).

  3. Connect the sensor electrical connector.
  4. Install the power steering pump. Refer to Power Steering Pump Replacement (LA1 ) or Power Steering Pump Replacement (LY7) in Power Steering System.
scientia non olet · About LEMON Manuals