Fuel Pressure Relief Procedure

Tools Required

• J 34730-1A  Fuel Pressure Gage. See Special Tools .
• J 34730-262  Fuel Pressure Gage Fitting. See Special Tools .

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery terminal.
Fig 1: Identifying Fuel Pressure Gauge J 34730-1A
Courtesy of GENERAL MOTORS CORP.
IMPORTANT: Install the fuel pressure gauge fitting above the belt in order to avoid contact with the belt.
2. Install the J 34730-262  adaptor to the fuel pressure connection. See Special Tools .
3. Connect the J 34730-1A  to the fuel pressure connection. See Special Tools . Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage.
4. Install the bleed hose into an approved container and open the valve to bleed the system pressure. The fuel connections are now safe for servicing.
5. Drain any fuel remaining in the fuel pressure gauge into an approved container.
6. Remove the J 34730-1A  and install the fuel pressure port cap. See Special Tools .