LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Locating Intake Air Temperature (IAT) Sensor Electrical Connector
    GM740106Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor (1) electrical connector.
  2. Carefully grasp the sensor and with a twisting and pulling motion, remove the IAT sensor from air intake duct.
scientia non olet · About LEMON Manuals